Command Designer Hooks, Medium, White, 2-Hooks (17081ES)

(No reviews yet) Write a Review


General purpose
Holds 1 kg/3 lb strongly
Removes cleanly

2 hooks
4 medium strips

Made in Taiwan and USA

Limited Warranty: This 3M product will be free from defects in material and manufacture. If this products is defective, your exclusive remedy shall be, at 3M's option, replacement of the product or refund of the purchase price. Limitation of Liability: 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential.


To apply:
Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips
Remove red liner. Press adhesive to hook
Remove black liner
Press to surface to 10 seconds
Important: For maximum holding strength slide hook off
And press base firmly for 30 seconds
Slide hook on
Wait 1 hour before use To remove:
Slide hook up to remove from mounting base
Never pull strip towards you
Hold base gently to prevent base from snapping fingers. Do not press base against wall
Stretch straight down along wall at least 12 inches (30 cm) until base and strip release Important: Failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit Note: Apply to surfaces above 50 F (10 C). Adhesive could lose adhesion above 105 F (40 C). Not intended for picture hanging. Instead use Command Picture Hanging Strips, Sawtooth or Wire-Backed Hangers. Hooks can be reused with Command Medium Strips..

DO NOT use with wallpaper. May not adhere well to vinyl surfaces. DO NOT use for antiques, heirloom, or other valuable or irreplaceable items. DO NOT hang items over beds. Use only one hook per item hung..