3M Command Strips Large Hook, 1 each

3m mounting holds on strongly. Comes off cleanly. No surface damage.

1 3m Command Hook. 2 3m command Large strips. Each 3m hook holds 5 lb (2 kg). Hook can be reused with Command. Adhesive Large Strips. Limited Warranty. Hook made in Taiwan. Strips made in U.S.A.

Follow instructions carefully! Save instructions for clean removal in the future! To Mount Hook: Clean Surface: Use isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. Apply Strip: Remove Red Command Adhesive liner. Align square end with raised line on back of hook. Press firmly. Press Firmly! - Remove black wall side liner. Position hook and press entire hook firmly for 30 seconds. Wait 1 hour before use. To Remove Hook and Base: Slide Hook Cover Up: Reveal mounting base and removal tab. Grab Removal Tab: To prevent base from snapping your fingers, hold base as shown. Do not press base against wall. Never pull the strip out at an angle. Strip could break or damage the surface. Slowly slide the tab straight down against the wall stretching the strip at least 15 inches (40 cm) until mounting base releases from the wall. Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could soften and lose adhesion above 105 degrees F (40 degrees C).